Yaroslav Kusyi , Аndrij Кuк, Oleh Onysko, Tetiana Lukan, Lolita Pituley, Iryna Shuliar, Yurii Havryliv

Lviv Polytechnic National University, Stepana Bandery St, 12, 79 000 Lviv, UA, jarkym@ukr.net, andrij.kuk@gmail.com 

Ivano-Frankivsk National Technical University of Oil and Gas, Vulytsya Karpatsʹka, 15, 76000 Ivano-Frankivsk, UA, onysko.oleg@gmail.com, lutana.ua@gmail.com, lolitapituley@gmail.com, ira.shuliar@gmail.com, meson1959@gmail.com


ISSN 2637-2150
e-ISSN 2637-2614
UDK 528.41:[620.1:621.793
DOI: 10.7251/STED0220013K

Paper received: 06.10.2020.
Paper accepted: 17.11.2020.
Published: 30.11.2020.

Corresponding Author: 
Yaroslav Kusyi, Lviv Polytechnic National University, Stepana Bandery St, 12, 79 000 Lviv, UA, jarkym@ukr.net.


Development and implementation in mechanical engineering practice of integrated information systems for control of technological processes of manufacturing products is the main driver of economic growth of developed countries. The priority of modern engineering technology is to provide the specified operational characteristics of products in accordance with the accuracy parameters, set by designer and quality of surface layers in contrast to achieving the minimum technological cost with maximum performance for traditional approaches. Technological providing of the main operational characteristics of the product (bearing strength, wear resistance, fatigue strength, joint strength etc.) require a systematic approach, which consists in the investigation of real physical processes at submicroscopic, microscopic and macroscopic levels of research, and stepby-step tracking required parameters at all stages of the Product Life Cycle from the position of technological inheritability. It is proposed to use the method of LM-hardness to control the quality of the structure of the material from castings in the design of functionally-oriented processes. The magnitude of the technological damage of the product material serves as a criterion for optimization when choosing a variant of surface treatment of the casting. A method for providing experimental studies of castings of aluminium alloys has been developed. On the basis of the carried-out experimental researches the rational route of processing of surfaces of casting is chosen.

Keywordssurface engineering, technological inheritability, functionallyoriented process.